Page 144 of 147

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Thu Jun 13, 2019 4:28 pm
by AKRebel
These vehicles I already have in planning, or are already partially created. However, it takes some time to create new units. The time will tell. Thank you

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Thu Jun 13, 2019 6:49 pm
by guille1434
It's ok as long as it is fun for you, friend... Take your time, but above all, enjoy it! :-)

I will tell you what units I am planning to make in order to complete the Pz 38(d) family, in case you want to avoid duplicate efforts and may be using part of what I upload here to help you with your projects...

- Aufklärungspanzer 38(d) mit 2cm KwK38 (based on your posted icon, I already made it with three switches: AT, Recon and AA)
- Aufklärungspanzer 38(d) mit 5cm KwK39 (a heavy recon variant with the Puma 8x8 vehicle turret. I could not find any evidence of a projected unit like that, but it will look cool) :-)
- Panzer 38(d) Morsertrager mit 12 cm GrW
- Panzer 38(d) Infantry Support Tank with Pz III N turret and PzIII model schurzen or wire mesh Von Thoma shields (heavily protected to deal with infantry type units in close terrain) ---> Another fantasy project
- Vollkettenaufklärer 38(d) (An armored personnel carrier, again I could just find info about the vehicle that was made based on the Pz38(t) chassis, but no info about a Pz38(d) variant, one more "highly what if" unit)
- Flammpanzer 38(d)
- 10,5 cm StuH 42 auf Jagdpanzer 38(d) (in AT and indirect fire switches)
- 15 cm sIG 33 auf Jagdpanzer 38(d)
- Flakpanzer 38(d) Kugelblitz
- 8,8 cm Waffenträger 38(d)

That's all at present...
Greetings!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 14, 2019 7:13 pm
by AKRebel
Hello guille1434, thanks for your support. Please do not be angry with me if I maybe optically adapt or change one or the other unit of them. I hope that's ok for you, because I really appreciate your work as well.

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Sat Jun 15, 2019 2:44 am
by guille1434
AK: As I always say, anyone can use all the stuff I upload here in any way he likes. So, there is no problem if you decide to change, modify or use parts of any of the icons posted here. :-)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Sat Jun 15, 2019 3:41 am
by guille1434
Now, back to the British aircraft department... Here is the Avro Lancaster bomber in four schemes: European regular (vanilla game brown), SE European, plain desert and SE desert.

Enjoy!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Sat Jun 15, 2019 6:27 pm
by guille1434
A late war, B-17G in a bare aluminum look... Late in the war, because of the very low threat from Luftwaffe fighters, it was found that stripping the bombers from its camo paint gave the following advantages: A reduction in aircraft empty weight, reduced drag which gave a little more speed/range or more payload for the same range...

This icon was made taking as a base the one present in the latest release of the Battlefield Europe mod v2.0 (thanks McGuba!!)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Tue Jun 18, 2019 6:53 pm
by guille1434
A new member of the "what if" Pz 38(d) family: Vollkettenaufklärer 38(d) Katzchen, which was an armored personnel carrier, more or less a second world war era M113, but still, without armored roof.
Enjoy!!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Wed Jun 19, 2019 12:45 am
by guille1434
Also, the SS version... 8)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Thu Jun 20, 2019 2:23 pm
by guille1434
A unit pack for the Aufklärungspanzer 38(d), with the regular Heer and SS camouflage colors. Each one, comes in three switches (recon, AA, AT). Enjoy!! 8)

EDIT: New, upgraded versions of the icons uploaded!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 21, 2019 4:03 am
by guille1434
Another highly "what if" unit, member of the 38(d) family: the Panzerwerfer 38(d) artillery rocket launcher. This vehicle was never built, nor existed in a project form. It is just a "plausible invention" from my mind... :-) I think it would have been technically feasible to mount the ten tube 15 cm Nebelwerfer rocket launcher as used on the Panzerwerfer 42 on an Aufklärungspanzer 38(d) hull (in case that enough 38(d) hulls could be produced to cover the demand for recon, tank destroyer, etc... vehicles). The longer hull provides internal volume to store additional rockets, and the rear mounted launcher gives place for a reloading hatch to be located on the hull top for the crew to reload the launcher tubes.

Well, this is "what if..." is it for... 8)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 21, 2019 3:34 pm
by AKRebel
guille1434 wrote:
Fri Jun 21, 2019 4:03 am
Another highly "what if" unit, member of the 38(d) family: the Panzerwerfer 38(d) artillery rocket launcher. This vehicle was never built, nor existed in a project form. It is just a "plausible invention" from my mind... :-) I think it would have been technically feasible to mount the ten tube 15 cm Nebelwerfer rocket launcher as used on the Panzerwerfer 42 on an Aufklärungspanzer 38(d) hull (in case that enough 38(d) hulls could be produced to cover the demand for recon, tank destroyer, etc... vehicles). The longer hull provides internal volume to store additional rockets, and the rear mounted launcher gives place for a reloading hatch to be located on the hull top for the crew to reload the launcher tubes.

Well, this is "what if..." is it for... 8)
very nice guille, keep it up

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 21, 2019 4:17 pm
by guille1434
Hello AK:

Thanks for your nice words... Also, taking as a base the icon you posted for the Krupp Waffenträger, I made another version of it, which had six roadwheels per side instead of four ones, and I think it was also a little wider. Here is the Einheitswaffenträger 38(d)... I hope you (and everybody) like it!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 21, 2019 7:53 pm
by AKRebel
guille1434 wrote:
Fri Jun 21, 2019 4:17 pm
Hello AK:

Thanks for your nice words... Also, taking as a base the icon you posted for the Krupp Waffenträger, I made another version of it, which had six roadwheels per side instead of four ones, and I think it was also a little wider. Here is the Einheitswaffenträger 38(d)... I hope you (and everybody) like it!
Hello guille:

The unit looks very good ...

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Sun Jun 23, 2019 2:50 pm
by guille1434
The fictional Panzerwerfer 38(d) in regular Heer and SS color schemes... Greetings!

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Sun Jun 23, 2019 6:21 pm
by guille1434
The Morserträger 38(d) mit 12 cm GrW is ready, in regular and SS camo... 8)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 28, 2019 12:35 am
by guille1434
Another member of the Pzkpfw 38(d) family, a fictional design... The Aufklärungspanzer 38(d) mit 5cm Kwk39. This "what if" vehicle mates an Aufklärungspanzer 38(d) hull with the turret used by the Sdkfz.234-8 rad wheeled recon vehicle...I also upload a line drawing of said design in order to be used as a big unit portrait in AKRebel's style :-)

Enjoy!!! 8)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 28, 2019 4:36 pm
by Ballermann
Thank you :D

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Fri Jun 28, 2019 8:05 pm
by guille1434
And this one, would be the same vehicle type, but based on the Kätzen hull, also mounting the Puma turret... Enjoy! 8)

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Mon Jul 01, 2019 3:25 pm
by guille1434
A subject change from German paper panzers and prototypes... An US Army M3A3 Stuart light tank...

Re: Guille's PzCorps Support Base - Multipurpose Icons and more.

Posted: Mon Jul 01, 2019 3:27 pm
by guille1434
...And based on that icon, a conversion made by Yugoslav partisans on the M3A3 hull with a 7,5 cm Pak40 gun captured from the Germans...