- 1. Enable reinforcements - unit, turn, hex location to be set in the editor (Done - use action trigger)
2. Change the G key (Generate terrain) so that it does not wipe out tiles that have been set
3. Allow the checking of unit stats from within the editor (e.g. what is the HA of a particular tank? prestige cost? etc.)
4. Enable victory conditions to be accessible at any time during a turn (not just at the beginning of a turn) - this is not actually an editor issue.
5. Enable the viewing of detailed information about the scenario (link to a RTF form or a PDF?) at any point in a turn
6. Give more space on the scenario briefing (currently it is 2 short lines). This would include date and combatants involved. startturn.htm
7. Add a campaign editor. It can be done currently by editing the campaigns.pzdat file but there is a lot of room for error and it's fiddly. Mark Garrett's Editor has this function.
8. Enhancement: the ability for a pop-up dialog box to display when a criteria (date, hex, unit) is met. e.g. President Roosevelt has died (1945 scenario); 17th SS Pz Div in Nurnberg, fear of the National Redoubt etc. (I'm working on an end-war scenario which is why I've thought of these examples). This would be intended to add 'atmosphere' to scenarios.
Enhancement requests: Scenario Editor
Moderators: Slitherine Core, Panzer Corps Moderators, Panzer Corps Design
-
- Panzer Corps Moderator
- Posts: 2112
- Joined: Tue Jun 03, 2008 9:32 am
Enhancement requests: Scenario Editor
I thought I would start this thread to see what improvements could be made to the Editor.
Last edited by El_Condoro on Wed Jan 04, 2012 10:32 pm, edited 2 times in total.
-
- Panzer Corps Moderator
- Posts: 2112
- Joined: Tue Jun 03, 2008 9:32 am
9. Ability for designer to designate where new units may be placed, like a PG2 supply hex. Currently it's in and around any flag that has been held for 2 turns but that can allow spawning of units at the front when they are intended to come from the reserves in the rear of the line.
[Edit]: There is a kind of workaround for this but it's not ideal. Set the underlying terrain to entrenchment; put a city overlay on top; add the flag or primary objective. The flag can be taken, it looks like a city, but it won't be used to produce units. The downside is that units will entrench at a faster rate than a normal city. The underlying terrain could be anything, really. Of course, if you use G (generate tiles) you lose the overlay!
[Edit]: There is a kind of workaround for this but it's not ideal. Set the underlying terrain to entrenchment; put a city overlay on top; add the flag or primary objective. The flag can be taken, it looks like a city, but it won't be used to produce units. The downside is that units will entrench at a faster rate than a normal city. The underlying terrain could be anything, really. Of course, if you use G (generate tiles) you lose the overlay!
Last edited by El_Condoro on Thu Aug 04, 2011 2:23 am, edited 1 time in total.
There shouldn't be a broad cap but instead let the creator/s define thier own limts specific to the scenario/map being made.savic13 wrote:13 Limit number of purchasing some units (like maus - limit to Max unit on map for maus to 2 will improve MP and some other scenarios) ..... El_Condoro your maps is awesome, I can imagine how will look if someone bring your options on scenario editor.
14 Fix the AI using resources like purchasing air and naval transports when available.
-
- 1st Lieutenant - Grenadier
- Posts: 786
- Joined: Thu May 21, 2009 9:28 pm
- Location: Augsburg / Bavaria / Germany...but I am from Eastern Germany !
16 supply points for new units only on one map edge with rail or street entrance (like PG2 !)
17 unit replacements only one point in one round possible - simulate a more time intensive replacement (more historical for my big map mod ! and more funny!)
18 more hex typs like Brush - Vineyard - Orchard - Marsh - Beach - Village - Industrial - Bocages
19 more hex typs for North Africa Addon like Wadi - Hammada - cactus field - Palm Trees - Dune
20 more difficult street typs 1. your normal Motorways - 2. Highways (to simulate interstate/freeways) 3. Paths - for some smaller ways.......all with differnet movement parameters for all unit typs !
21 more different bridge typs for all differnet street typs like fords - woodem bridges - stone bridges - railway steel bridges - steel bridges......all with differnet movement parameters for all unit typs !
22 more different water typs like little streams - straight out canals
23 buildable obstacles (possible for building units - german Baupioniere) like Wood barricade for normally pioneers - Barbed wire - dragon tooths (Drachenzähne) - beton walls.......usable for Normandy scenarios or Stalin line etc.
24 Headquarter units for divisional - corps - army - front headquarters permit subordinated all units - supply all units only with this units possible - every Headquater unit have a limit (can be bought however in addition) of Gasoline and ammo and a troop replacement limit
25 Generals for every of this headquaters with historical names and pictures (I have 90 % names and pictures for all battles in WW2), troop signata and special Abilities (are added in the campaign !) Generals must to be exchangeably !
26 subdivide the name announcement - Tropp trees for this system with an own Announcement for every unit (Batallion) - Regiment - (Brigade) - Division - Corps - (Group) - Army - Front (Example 1st german tank division 1940: I. / 1. / 1. / 1. / XIX. / K .......If you click on the number you can see 1st tank Batallion / 1st tank regiment / 1st tank brigade / 1st tank division / 19th Army corps Guderian / tank group Kleist
27 ingame animations like General briefings or special events in english, german, french and russian languages. (BTW - I can undertand all 4)
28 Your units looks fantastic - but A little dream: full animated units in 8 (better 16 directions) with 20-30 frames for all actions like move1 - move2 - waiting1 - waiting2 - fire1 - fire2 - destroy1 - destroy2 - resulted (I know thats 1000 hours of hard work !)
I like also all other points !
H.Balck
17 unit replacements only one point in one round possible - simulate a more time intensive replacement (more historical for my big map mod ! and more funny!)
18 more hex typs like Brush - Vineyard - Orchard - Marsh - Beach - Village - Industrial - Bocages
19 more hex typs for North Africa Addon like Wadi - Hammada - cactus field - Palm Trees - Dune
20 more difficult street typs 1. your normal Motorways - 2. Highways (to simulate interstate/freeways) 3. Paths - for some smaller ways.......all with differnet movement parameters for all unit typs !
21 more different bridge typs for all differnet street typs like fords - woodem bridges - stone bridges - railway steel bridges - steel bridges......all with differnet movement parameters for all unit typs !
22 more different water typs like little streams - straight out canals
23 buildable obstacles (possible for building units - german Baupioniere) like Wood barricade for normally pioneers - Barbed wire - dragon tooths (Drachenzähne) - beton walls.......usable for Normandy scenarios or Stalin line etc.
24 Headquarter units for divisional - corps - army - front headquarters permit subordinated all units - supply all units only with this units possible - every Headquater unit have a limit (can be bought however in addition) of Gasoline and ammo and a troop replacement limit
25 Generals for every of this headquaters with historical names and pictures (I have 90 % names and pictures for all battles in WW2), troop signata and special Abilities (are added in the campaign !) Generals must to be exchangeably !
26 subdivide the name announcement - Tropp trees for this system with an own Announcement for every unit (Batallion) - Regiment - (Brigade) - Division - Corps - (Group) - Army - Front (Example 1st german tank division 1940: I. / 1. / 1. / 1. / XIX. / K .......If you click on the number you can see 1st tank Batallion / 1st tank regiment / 1st tank brigade / 1st tank division / 19th Army corps Guderian / tank group Kleist
27 ingame animations like General briefings or special events in english, german, french and russian languages. (BTW - I can undertand all 4)
28 Your units looks fantastic - but A little dream: full animated units in 8 (better 16 directions) with 20-30 frames for all actions like move1 - move2 - waiting1 - waiting2 - fire1 - fire2 - destroy1 - destroy2 - resulted (I know thats 1000 hours of hard work !)
I like also all other points !
H.Balck
I think this part is along way off.El_Condoro wrote:9. Ability for designer to designate where new units may be placed, like a PG2 supply hex. Currently it's in and around any flag that has been held for 2 turns but that can allow spawning of units at the front when they are intended to come from the reserves in the rear of the line.
For now, if they can give us the parameter to set how long a city waits to become active for replacements. Currently it is one turn, so a unit from the rear can move two turns to get to the newly captured city. Since most maps are small changing this setting to two or three will give the player who places a unit in the rear to move farther.
Example; wait two turns. On third turn they can place. If you place in rear on first turn, then you can move two turns to be at the same location as the recently captured city. For tanks that's 10 hexes. If you extend the wait period to three turns then the player placing a unit in the rear can move their tanks 15 hexes.
They are not going to change the supply system. Game is meant to be simple. This has been stated at least twice in the forum by developers.HBalck wrote:16 supply points for new units only on one map edge with rail or street entrance (like PG2 !)
24 Headquarter units for divisional - corps - army - front headquarters permit subordinated all units - supply all units only with this units possible - every Headquater unit have a limit (can be bought however in addition) of Gasoline and ammo and a troop replacement limit
25 Generals for every of this headquaters with historical names and pictures (I have 90 % names and pictures for all battles in WW2), troop signata and special Abilities (are added in the campaign !) Generals must to be exchangeably !
H.Balck
16) we already have the ability to generate sources of prestige. I have them in 3 of my MP maps now. Just think of prestige as supply.
-
- 1st Lieutenant - Grenadier
- Posts: 786
- Joined: Thu May 21, 2009 9:28 pm
- Location: Augsburg / Bavaria / Germany...but I am from Eastern Germany !
29 Many many more units - more transport units _ Missing are over 100 - Where is the KV-2 (BTW my favorit tank from PG - many soviet battalions had full equipment KV-2) and many more uniforms for soviets , germans and others. Some PC units looks like american uniforms set with different colours. Sorry, but the soviet / german uniforms looks a litle different like yours.
-
- 1st Lieutenant - Grenadier
- Posts: 786
- Joined: Thu May 21, 2009 9:28 pm
- Location: Augsburg / Bavaria / Germany...but I am from Eastern Germany !
30 more than 2 human players - maximal 8 for very large maps 4 vs 4 - also possible some of the own fraction units command by AI
and most important !!!
31 adjustably map image in every section of the produced PC map ! Now you can only use one image map in the full Propagation map - but I need only parts of different maps in a produced big map ! Example: For an big map - like my Barbarossa Army Group Center , full Poland Fall Weiss I can not use 50 or 60 of my army maps in one image - I must use every 1:100000 map part successively.
32 Foreground weather animations like rain , snow or sand storming with some nice very quietly weather sounds. Its very easy to to with some different 50 fames png only viewing in the map size window. Also I have all the sounds generated.
33 In the same wise possible - foreground Officers and Generals head animations for ingame helps and mission briefings. Historical faces are possible for me ! Give us a very good ingame feeling and show us the nice different uniforms for all unit typs in every nation.
and most important !!!
31 adjustably map image in every section of the produced PC map ! Now you can only use one image map in the full Propagation map - but I need only parts of different maps in a produced big map ! Example: For an big map - like my Barbarossa Army Group Center , full Poland Fall Weiss I can not use 50 or 60 of my army maps in one image - I must use every 1:100000 map part successively.
32 Foreground weather animations like rain , snow or sand storming with some nice very quietly weather sounds. Its very easy to to with some different 50 fames png only viewing in the map size window. Also I have all the sounds generated.
33 In the same wise possible - foreground Officers and Generals head animations for ingame helps and mission briefings. Historical faces are possible for me ! Give us a very good ingame feeling and show us the nice different uniforms for all unit typs in every nation.
-
- 1st Lieutenant - Grenadier
- Posts: 786
- Joined: Thu May 21, 2009 9:28 pm
- Location: Augsburg / Bavaria / Germany...but I am from Eastern Germany !
34 Not every water hex or bigger river is frozen in winter scenarios - usable to change this things in the editor. Example: The Ladoga sea is frozen, but the Moskwa or the Wolga isnt frozen and can not crossed by units.
35 Can we crossed the big rivers with bridge eng units ? I think this unit can also use for the big rivers, but better with a new ponton bridge building feature and more time to do that.
35 Can we crossed the big rivers with bridge eng units ? I think this unit can also use for the big rivers, but better with a new ponton bridge building feature and more time to do that.
This one is already possible, I used this method in some of the current MP maps.HBalck wrote:34 Not every water hex or bigger river is frozen in winter scenarios - usable to change this things in the editor. Example: The Ladoga sea is frozen, but the Moskwa or the Wolga isnt frozen and can not crossed by units.
Instead of using lake tiles to make lakes, use the deep sea tile. They look identical, but deep sea will never freeze. Then simply rename your text string to 'lake'.
Similar idea for rivers. Don't use a river tile, use a deep sea tile. The only difference in this case, however, is that instead of using a deep sea overlay, you use a 'river' overlay on top instead. It now looks like a river, but behaves like deep sea, impassable water that does not freeze in snow.
-
- Panzer Corps Moderator
- Posts: 2112
- Joined: Tue Jun 03, 2008 9:32 am
Make it optional then. Currently, if you want to give a player extra prestige for taking a flag as compared to turn-based prestige you are also giving him a supply point. That may not be, and in most cases for me, is not what I want to do. I want to give a city, a flag, 50 points of prestige and an observation point (for the hexes around) but I do not want the player to be able to spawn in the 2000 or whatever prestige points he has been saving. The current system is at variance with logistical reality and works against historical scenarios. No need for rail - just wait for a couple of turns and that flag will allow you to spawn in 7 units.Razz1 wrote:I think this part is along way off.El_Condoro wrote:9. Ability for designer to designate where new units may be placed, like a PG2 supply hex. Currently it's in and around any flag that has been held for 2 turns but that can allow spawning of units at the front when they are intended to come from the reserves in the rear of the line.
For now, if they can give us the parameter to set how long a city waits to become active for replacements. Currently it is one turn, so a unit from the rear can move two turns to get to the newly captured city. Since most maps are small changing this setting to two or three will give the player who places a unit in the rear to move farther.
Example; wait two turns. On third turn they can place. If you place in rear on first turn, then you can move two turns to be at the same location as the recently captured city. For tanks that's 10 hexes. If you extend the wait period to three turns then the player placing a unit in the rear can move their tanks 15 hexes.
-
- Panzer Corps Moderator
- Posts: 2112
- Joined: Tue Jun 03, 2008 9:32 am
You're right - it works against custom scens, too. For example, in Urban Warfare or Hylan you have a reasonable starting force, lots of prestige to choose your army with and a lot of unowned flags. Why build your army at the start? - then you have to move them and run them out of fuel and, once committed you might find your opponent is attacking in a different area. IMO it's better to hold your prestige, take a few flags, wait to see what your opponent is doing and then, after the 2 turns, spawn your units in where they're needed, complete with full fuel. That's fine if the scenario designer wants it that way, but it doesn't leave the *option* of encouraging the player to reinforce from a set location or to buy an army at the start of the scenario.Razz1 wrote:If you have that much prestige you should be loosing in MP or the scenario has too much prestige.